Apex Resin - One to One Epoxy Resin Kit, Crystal Clear High Heat Resistance for Coasters, Placemats and More

•Apex Resin - Crystal Clear

•High Heat Resistance

•Apex Resin is at the top of it’s game for epoxy resin art, we didn’t call it Apex for nothing! :) 

•Featuring extreme clarity for a pristine, clear finish for Resin Art and minimal bubbles.

• It is a one to one resin with a high heat resistance

•Designed to create a solid, non - scratch surface.

•Apex Resins are the most durable resin on the market so you can be confident your artwork will stand the test of time, resist yellowing and cope with cup after cup with no marks or traces.

•Suitable for coasters, trays, geodes, table tops, jewellery and more.

•The all important features

•Easy one to one mixing ratio by volume

•Heat Resistant up to 90ºc / 194ºF perfect for coasters, placemats

•Features extreme clarity for a pristine, water clear finish

•The most durable resin on the market so you can be confident your artwork will stand the test of time and cup after cup, with no marks or traces

•Advanced formulation to minimise bubbles when pouring (we recommend to also preheat part A (resin) in a warm water bath if your work area is cold

•ASTM Certified non-hazardous, non toxic and no VOCs 

•Suitable for coasters, trays, flooring, table tops, jewellery, flower preservation and more

•Highest UV resistance for non-yellowing and protection of your artwork. 

•Self levelling

•Working time 25 -30 minutes at 25ºc

•Touch dry in 16 - 20 hours at 25°C (Full cure in 1-2 Days)

•Non flammable

•Low viscosity

•Odour Free

•Perfect for use with our glitters, pigments, epoxy pigment pastes and dyes.

•Suitable for use as a food safe coating but not as a cutting/food preparation surface.

•Read instruction leaflet and mix carefully to ensure accurate results.

•Mix for at least 3 minutes, scraping the sides and the bottom of the container 

•By Volume A / B = 100 /100  (100 parts Resin / 100 parts Hardener) (For example 100ml Resin / 100ml Hardener)

•By Weight  A / B = 110 / 100 (110 parts Resin / 100 parts Hardener) (For example 110g Resin / 100g Hardener)

•Epoxy heats up faster in larger quantities, so only mix the amount needed for use within the working time and separate into smaller containers to ensure your full working time.

•Work time - 25 - 30 minutes at 25°C

•Cure time - Touch dry in 16 - 20 hours at 25°C (Full cure in 1-2 Days)

•Viscosity - Mixed 1700 Centipoise

•Heat Resistance - up to 90°C

•Hardness 25°C after 3 days - Shore D 80

•Maximum pour thickness - 3cm

•Coverage - Applied 0.5mm thick per litre of mixed resin = 2m2

•Shelf life - 12 months in sealed containers  

•Always wear nitrile gloves

•Wear a respirator when sanding partially cured resin 

•Work in a well ventilated room

•Although a respirator is essential when sanding partially cured resin, we also recommend the use of one whenever working with resin for complete protection, especially when additives such as inks, paints, pigments have been added to resin

•Wear safety goggles

•Avoid skin contact, if contact occurs-wash with soap and water

•Allow the resin to fully cure before handling

•Avoid contact with clothes and furniture. If resin is poured on unwanted areas wipe immediately with a clean, dry cloth using acetone or similar solvent 

•Do not eat, drink or smoke while working

•In case of eye contamination wash with plenty of water for more than 15 minutes and seek medical advice immediately.

•If swallowed, seek medical advice immediately if you feel unwell

•If alcohol inks have been used, do not use a flame as alcohol is flammable

•Keep out of reach of children 

•Safe for incidental food contact only and not as a food preparation or cutting surface. Food should not exceed 50°C