PDR Car Paintless Kit Dent Puller Lifter Repair Removal Hail Gun Tool + UK Plug

How to use this paintless dent repair kits? 1.  Clean the dent with a clean wet cloth; 2.  Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.  Use a proper drawing gasket.   Large dent requires a large drawing gasket.   (Note: The larger the drawing gasket is, the larger the drawing force is); 4.   Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5.   Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes.   The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6.   Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7.   Check with a Line board.   If dent still exists, knock it slightly with a flattening hammer or pen; 8.   Clean the repaired place with a clean wet cloth. Dent Lifter It's feet can be removable, It can fixt the dent of 3-10cm; The height can be adjustable, Save power and time; Made of high quality material, anti-rust and reuseable; Bridge puller It is handsfree to help you fix the dent; It has Adjustable feet , for dent which is 3 to 10 cm. The size of the button fits more closely to the contact surface of the hand, making it easier and less strenuous to use High quality brass nut, not easy to rust, will not slip, longer service life Rubber Hammer The hammers are used to repair overdrawn, or relatively small dents Plug Type:UK Plug Package include:  56pcs/set PDR Tools (Not included glue removal)