About this product
Warranty DurationNot Applicable
Plug TypeUK Plug
Product description
The PXSPDY6SB#100 from Speedy RJ45 is a pack of 100 Cat 6 shielded plugs which are designed to simplify twisted pair terminations by allowing the wire pairs to be easily inserted through the plug and out of the front. This allows the installer to easily check the wiring order before crimping the connector. Twist is maintained more easily enabling a better performing crimp. Waste is minimised and the plugs are suitable for either stranded or solid wires.
Allows Category 6 twisted pair wires to be inserted through the body and pulled out of the front to ensure the correct wiring order before crimping
By pulling the cores into the plug, twists can easily be maintained up to the contacts, enabling fully rated category performance
Contact blades are suitable for stranded or solid wire cores from 22‐26 AWG (0.65 - 0.40mm), with insulation up to 0.98 ± 0.04mm O.D
Perfect solution for rapid termination
Suitable for termination of solid or stranded STP cables with sheath O.D. of 5.0 - 6.5mm
Faults and failures minimised
Shielded cable can be easily terminated without need for soldering
Foil wrap included to improve performance of shielding
Designed for use with polycarbonate flush strain relief boots (PSPDY6) and coloured PVC flush strain relief boots (PS6)
Materials: Housing: Polycarbonate UL94‐V0 and Contact pin: 50" µ/1.27 µm gold plating over nickel over phosphor bronze
Electrical: Contact resistance: 30milliR max. Insulation resistance: DC 300V, 100 MegaR min. Dielectric withstanding voltage: 300V AC for one minute
Mechanical: Working temperature: ‐25‐55˚C Durability: 1000 mating cycles min. Tensile strength between plug and jack is higher than 7.7kg
Modular Connector Type: RJ45 Plug
Port Configuration: 1 x 1 (Port)
No. of Positions / Loaded Contacts (per Port): 8P8C
Connector Mounting: Cable Mount
Connector Orientation: Straight
Magnetics: Without Magnetics
Light Pipes: Without Light Pipe