Search
£25.00
Bond It Rapid Set Tile Adhesive Rapid Floor Cement Wall Ceramic Bag Grey (20)
Sold by MH SELLERS
Free shipping
Select options
Select
Shipping
£0.00
MH SELLERS
46 items
Product description
•Bond It RAPID-SET is a specially formulated, fast setting thick or thin bed adhesive for bonding ceramic tiles and mosaics to walls and floors.
•RAPID-SET will bond to concrete, sand/cement screeds, building blocks and brickwork.
•RAPID-SET is suitable for interior use including locations which are subject to regular wetting, eg. domestic showers and bathrooms.
•Rough and Uneven Surfaces: These should be levelled with a suitable levelling compound and allowed to dry before tiling.
•Clean off surplus adhesive with a damp cloth before it sets. It is important that the tiles are left undisturbed for a minimum of 2 hours after fixing at normal temperatures.
Description:
A grey, cement based ceramic floor and wall tile adhesive. Conforms to EN 12004 Type C1F
Uses
Bond It RAPID-SET is a specially formulated, fast setting thick or thin bed adhesive for bonding ceramic tiles and mosaics to walls and floors. Because of the fast acting properties, tiles and mosaics can be grouted and suitable for use in approximately 2 hours after fixing (at normal temperatures). RAPID-SET will bond to concrete, sand/cement screeds, building blocks and brickwork.
Preparation
The substrate must be clean, structurally sound and free from dust, oil, grease and any other contamination that may prevent adhesion.
w Concrete: Ensure that these are dry and cured through. Freshly laid concrete can take up to 3 months to fully cure. Do not apply tiles until it is fully cured.
w Painted Surfaces: Any loose or water sensitive paint should be removed. Any subsequent bonds to a painted surface are only as strong as the paint film.
w Rough and Uneven Surfaces: These should be levelled with a suitable levelling compound and allowed to dry before tiling.
Mixing
A 10Kg bag of RAPID-SET should be mixed with 4 Litres of clean water using a mechanical stirrer. Mix to form a soft, lump free consistency. Do not mix more adhesive than can be used in a 15 minute period. In hot weather the pot life will be reduced.
Specification Summary
Flammability Non-flammable
Maximum Bed Thickness 6mm
Coverage 20Kg bag 6-7m2 @ 3mm bed thickness
Open Time Approximately 15 minutes
Time To Traffic Approximately 2-3 hours
Product Details:
Colour: Grey
Code: BDRS10 & BDRS20
Size:10kg & 20Kg
Barcode: 5060021363411 & 5060021363404
Package Content
Grey Rapid Set Tile Adhesive Rapid Floor Cement & Wall Ceramic Bag Bond it 20kg
Explore more from MH SELLERS
£9.99
4.4
3880sold
£5.99
£11.98
No more products
Open TikTok