Panic Alarm, Wireless Outdoor Panic Alarm.

This is a simple to install and use wireless panic alarm with three panic buttons, junction box and power adapter.

The siren and strobe is weatherproof so can be mounted outdoors. 

This alarm is powered by a 12v power adapter that plugs into a mains socket. The jack plug on the adapter plugs into the side of a wall mounted junction box supplied with the kit. You would need to connect a small 2 core cable from the junction box to the siren / strobe assembly to provide the 12v power. The cable is not supplied with the kit, as you would need to purchase a piece the length you require.

The 3 x wireless panic alarm buttons would be mounted in hidden / discreet places using the double sided sticky pads supplied.

 

The alarm is programmed and ready to use once installed.

When the power is switched on a red LED lights up on the base of the siren to show it is armed.

Press any panic button and the alarm will start sounding and the blue strobe will flash, to stop the alarm sounding you just press any of the panic buttons once again.

The two tone siren is 110db and is pretty deafening especially if used indoors, nobody stays to listen to it.

Siren / strobe assembly

Power.                              12vdc

Approx Overall Height.   22cm

Approx Overall Width     10cm 

Approx Overall Depth    19cm

Panic buttons

Power     12vdc battery, supplied

Length    70mm

Width      40mm