1200Mbps Dual Band WiFi Repeater Range Extender Wireless Signal Booster Adapter

Weight: 126g

Product nuine dual chip: MTK7612EN + MTK7620A

Speed: 1200M

Relay distance 0.015 (Km)

Hardware specifications: Plug: European standard

Input voltage: 110-240V

Coverage area: 100-130 square meters

Transmission medium: non - type 5 shielded wire

Lightning protection: There is lightning protection

Product Performance:

1.WiFi amplifier signal enhancement receiver (relay mode)

2. Dual-band Router (AP mode)

Trunk mode:

Sometimes the device (computer, cell phone) may be in the living room, but because of poor reception, the bedroom may only have one bar, which requires further expansion of the wireless network. At this time, you can consider using a repeater to expand the network through the relay mode. The name of the "amplified" wireless signal is the same as that of the original wireless router signal by default. You can also change the Settings according to your own habits. When setting the repeater, it needs to connect to the signal of the upper-layer router and keep the connection signal in good condition, which is conducive to the stability of the extended network signal.

Features:

Through wireless to wireless, 1:1 copy of a wireless network and signal amplification, extend the coverage. Application scenario: Expand the network to achieve signal "coverage" within a certain range

AP Mode:

The AP mode is special. Generally, only the AP hotspot device supports this function. The AP device does not support the bridge and routing modes, but supports the trunk function. The difference between a trunk and an AP hotspot is simple. The trunk mode is a 1:1 replication of a wireless network without cable connection. Both routers and AP devices support this mode. In AP mode, network cables are used to expand WiFi signals, but it is not responsible for network management. It is equivalent to a switch with wireless function, which converts wired signals into wireless signals. Other functions need to be realized by routers (IP allocation, network management, etc.). Our repeater does not support changing the WIFI name in AP mode, and the password is in the default factory password free state

Features:

It is converted into a wireless network through network cables and has no management and routing functions.

Application scenario: The AP overrides signal dead corners and functions as a trunk. However, the AP does not need to be configured and needs to be connected to network cables for plug and play.

Product list:

Repeater*1