Bond it Aerosol Strong Industrial Spray Adhesive Carpet Tiles Fabrics Glue 500ml

Description: A non‐chlorinated, exceptionally strong, fast acting, easy to use, multi‐purpose adhesive in an aerosol can. Uses Bond It SPRAY ADHESIVE is a non-chlorinated, exceptionally powerful, long-lasting, multi purpose adhesive. It does not contain damaging or harmful materials such as CFC's or Methylene Chloride (Dichloromethane). For use on materials such as fabrics, wood, concrete, metal, plastic, rubber, paper, card and is particularly suited to bonding foam to foam. It is fitted with a variable discharge nozzle that controls the width of the spray fan; the more pressure applied to the nozzle the wider the fan. It is ideal for the fixing of carpets, carpet tiles, cork tile, underfelts and minor floor installations, for use in the furniture and automotive industries, especially for bonding foam to a variety of surfaces. Also suitable for use in repair and non-structural applications where a high strength bond is required. Application SHAKE WELL BEFORE USE. ONLY USE IN WELL VENTILATED AREAS. Ensure surfaces are clean, dry and free from any contaminates that may hinder adhesion. For best results; use in temperatures between 15 and 25o C. Apply to the surface holding the can approx. 25cm away. For a strong bond apply to both surfaces, for a lighter bond apply to only one. Leave the solvent content of the adhesive to evaporate for 3 - 5 minutes before bringing the surfaces and applying pressure, working outwards from the centre. Excess adhesive is easily removed by using solvent / lighter fluid, etc. When finished; invert the can and spray for a few seconds in order the clear the valve ready for the next use. Limitations Not recommended for use on polystyrene or plasticised PVC. Note: This product should not be used for construction purposes such as unsupported head linings in vehicles and boats. It is NOT suitable for use with non rigid / plasticised PVC and should not be used on surfaces where temperatures may exceed 50oC. Container Size 500ml aerosol can. Colour Beige in colour Shelf Life 12 months from date of manufacture, when stored in original, unopened containers. Storage Conditions Caution: pressurised container. Should be stored between 10 and 20o C in dry areas protected from direct sunlight. Do not expose to temperatures exceeding 50oC. Do not pierce or burn even after use. Do not spray on a naked flame or any incandescent material. Disposal of Containers Do not leave empty containers where residue could be harmful to children, animals or the environment. Replace lids and remove any containers to a central disposal point in accordance with local regulations. Do not pierce can. In the event of spillage remove all sources of ignition, ventilate the area, remove people from confined areas. Material should be mopped up immediately with an inert absorbent material such as sand. Health & Safety Highly flammable. Please refer to separate material safety data sheet for full handling, use and storage instructions. If respiratory protection is required use an organic vapour/particulate face mask. Keep out of reach of children. It is the users responsibility to determine suitability for use. If in doubt contact our Technical Department for advice. Note: this information is for general guidance only, since site conditions and labour are beyond our control. It is recommended that users make their own tests to determine suitability. Specification Summary Flammability Extremely flammable Flash Point - 40oC Appearance Sticky resin Solubility in Water Insoluble Application Temperature +15oC - 20oC Coverage 4m2 per 500ml UN No: 1950 UFI Product Details: Part of the Bond It Glues & Adhesives Range Colour: Beige Code: BDA007 Size: 500ml Barcode: 5060021361929 Package Content Bond it Aerosol Strong Industrial Spray Adhesive Carpet Tiles Fabrics Glue 500ml